LDC Single Girder Low Headroom Overhead Crane: Efficient Design for High Lifting in Low-Ceiling Workshops

LDC single girder low headroom overhead crane consists of a box main girder welded by steel plate, end girder, electric hoist, and running mechanism, and the lower flange plate of main girder (material 16Mn) is used as the running track of electric hoist to complete the lifting work of goods. The electric hoist has a low headroom structure, which can effectively raise the lifting height, and is suitable for places with low plant and high lifting height requirements.

Characteristics of LDC Single Beam Low Headroom Bridge Crane

• The main girder is mostly of square box structure, and the wheels of the electric hoist traveling trolley can run back and forth on the flange plate under the main girder. And the hoist trolley of LD type electric single girder crane is traveling on the I-beam flange under the main girder.
• Compared with ordinary electric single girder crane, it has better utilization of height space. Mainly used in the plant height direction of the headroom size restrictions, but the customer also needs lifting equipment lifting height as far as possible to maximize the situation.

Single Girder Low Headroom Overhead Crane Main Beam Internal Joint Robot Welding Line

• Compared with manual work, the welds formed by the robot are excellent in shape, the weld width is uniform, the surface is flat, and the defect is basically zero.
• Due to the uniform width of the weld, the damage caused by the stress concentration on the weld is greatly reduced, and the average weld height is higher than that of the artificial weld, which greatly improves the strength of the product.

LDC Low Headroom Overhead Crane VS LD Overhead Crane

The LDC type electric single girder overhead crane is a beam-type crane with a low-clearance structure. Compared to the LD type electric single girder overhead crane, it offers better utilization of height space. It is primarily used in situations where the vertical clearance in the workshop is limited, but customers still require the maximum possible lifting height for the crane equipment.

The main girder of the LDC low-clearance single-girder overhead crane is often constructed in a box-type structure. The wheels of the electric hoist trolley can reciprocate along the lower flange plate of the main girder. In contrast, the hoist trolley of the LD type electric single-girder overhead crane travels on the flange of the I-beam located beneath the main girder.